| Cad Designing Facility for Electrical & Mechanical Drawings through Pro-E, Solidworks. |
| Lifting Facility up to 15 Tones Capacity. |
| Digital Temperature Controlled Hot Air Circulating Oven: 2W x 3L x 3H Mtrs. |
| Neat, Clean and Dust Free Coil Manufacturing Shop. |
| Rotor Pole Winding Machine: Length: 4.0 mtrs, Dia.: 1.5 mtrs; Weight: 5 Ton. |
| Coil Winding Machine for LT |
| Coil Looping Machine up to 4.5 Mtrs for HT Jobs. |
| Coil Spreading Machine Span: 2.0 Mtrs; Length: 5.0 Mtrs Pin to Pin. |
| Coil Moulding Machine: 40 to 75 mm x 100 to 150 mm (Slot Moulding Size). 5.0 Length |
| Micro processed Based Computerized Dynamic Balancing Machine suitable for Rotating jobs upto 15 Tonnes Capacity: Job Length:7 Mtrs; Dia.: 3.25 Mtrs with Printing Result Parameters Facility. |
| Hydraulic Bearing Puller for Pulling / Insertion of Pulley / Coupling. |
| Jig and Fixture for Core Pressing and Stacking |
| Hydraulic Press to pull out shaft from rotor; core stack from stator. |
| Arrangement for ARC, GAS; TIG Welding Set (Make ESAB). |
| Facility for Lathe Machine, Vertical Turning Lathe, Horizontal Boring Machine, Shaper Machine, Milling Machine, Surface; Cup Grinder. |
| Resin Glass Overhang Banding Machine with Movable Tensioner. |
| Wedge Fabrication Machine. |
| Coil End Insulation Stripping Machine. |
| Bar / Strip / Round Conductor Tapping Machine, |
| Transformer Coil Winding Machine for HT / LT transformers. |
| Shearing machine for Cutting. |
| Power Hacksaw for Cutting purpose. |
| Hand Drill / Portable Drill and Radial Drill Machine up to 60mm dia. |
| Digital Micro Meter and Vernier Calliper |
| Steam Washer for winding cleaning |
| Bearing Induction Heater |
| Sno | Description | Quantity |
|---|---|---|
| 1 | Testing of HT/HV Motors on Rated Voltage at Rated RPM (3.3/6.6/11 KV) | 1 |
| 2 | Thermal Imaging Camera | – |
| 3 | SKF Noise Analyzer | – |
| 4 | Insulation Tester (IR value) | 1 KV, 5 KV, 10 KV |
| 5 | High Voltage Test Set (HV test) |
0-60 KV AC, 0-5 KV AC 0-30 KV DC |
| 6 | Tan Delta Test Set | 01 Nos. |
| 7 | Surge-Comparison test | 01 Nos. |
| 8 | AC Motor Testing Panel | 01 Nos. |
| 9 | DC Motor Testing Panel | 01 Nos. |
| 10 |
Single/Double Brg Alternator Test Bench Set with Required attachments & fixtures |
01 Nos. |
| 11 | Dynamic Balancing Facility (available next door) | Upto 25 Ton |
| 12 | Micro Ohm Meter Digital/Winding Resistance Test | 03 Nos. |
| 13 | Clamp Meter/Multi Meter | 05 Nos. |
| 14 | RPM Meter Digital, Non-Contact Type | 02 Nos. |
| 15 | Sound/Noise Level Meter | 02 Nos. |
| 16 | Vibration Level Meter | 02 Nos. |
| 17 | Spring Tension Measurement (carbon brush/holder) | 01 Nos. |
| 18 | High Current Injection Set (0-500 Amp DC) | 01 Nos. |
| 19 | AC Variable Voltage Set (0-440 Volt, 200 Amp) | 01 Nos. |
| 20 | Power Analyzer | 01 Nos. |
| 21 | Harmonics Analyzer | 01 Nos. |
| 22 | Polarization Index Ratio Meter (PI) | 01 Nos. |
| 23 | Di-Electric Absorption Ratio Meter (DAR) | 01 Nos. |
| 24 | Turns Ratio Tester | 01 Nos. |
| 25 | Magnetic Balance Tester | 01 Nos. |
| 26 | Break Down Voltage of Oil (BDV) | 01 Nos. |
| 27 | Pressure Test System for Transformer Fins & Tank | 01 Nos. |
| 28 | 40,000 PSI Hyd. oil coupling puller | 01 Nos. |
| 29 | Digital Boregauge for measuring clearance of bearing in housing ( Upto 550mm ) | 01 Nos. |
| 30 | Digital Micrometer for measuring clearance of bearing On Shaft ( Upto 450mm ) | 01 Nos |